How-to
5 Steps to Judge Window Cleaning Quality
Quick Summary
Window cleaning quality is best judged in daylight by walking the exterior glass on a clear morning when low sun hits the panes at an angle. Streaks, film, and water spots become easy to spot this way. Then run a written checklist and record the findings so each service can be compared over time.
- Inspect exterior glass on a clear morning when the sun is low.
- Check for streaks, smudges near door handles, water spots, and missed corners.
- Don't judge from ground level alone, since upper floors show residue that is hard to see.
- Wipe frames, sills, and tracks, not just the glass, and clean screens too.
- Record the date, areas reviewed, defects with photos, and any return visit requested.
Table of Contents
- Step 1: Walk the Glass Under Natural Light
- Step 2: Run a Window Cleaning Quality Inspection Checklist
- Step 3: Record Findings in a Window Cleaning Inspection Report
- Frequently Asked Questions
Step 1: Walk the Glass Under Natural Light
Good window cleaning quality shows best in daylight. Walk the exterior glass on a clear morning when the sun is low and hits the panes at an angle, streaks, film, and water spots stand out clearly.
Look for streaks in long lines, smudges near door handles and low panes, water spots, and missed corners along frame edges and sills.
Check frames, tracks, and screens too, a pane can look clean while the frame holds grime.
Watch out: Don't judge from the ground alone. Upper floors often show residue that's hard to see from street level.
Step 2: Run a Window Cleaning Quality Inspection Checklist
Once you've walked the glass, move to a structured check. A written checklist keeps your review consistent from visit to visit.

Use this checklist after each cleaning:
- Glass is free of streaks when viewed at an angle
- No smudges or fingerprints remain on low or high-traffic panes
- Water spots and hard-water residue are gone
- Frames, sills, and tracks were wiped, not just the glass
- Screens are clean and back in place
- No cleaning solution or drips remain on walls or floors
- Missed spots were noted and scheduled for a return visit
Working through the list item by item catches problems a quick glance would miss. On larger properties, keep the checklist with your service records to compare results over time. You can also browse window cleaning resources and advice on maintenance, scheduling, and what good service looks like.
Clarity provides free estimates for all window cleaning needs. Facilities managers and property managers can request a free estimate to set a clear scope of work before the next service.
The checklist below sums up what to verify after each cleaning visit.
| Check | What to look for | Note |
|---|---|---|
| Glass streaks | Viewed at an angle | Look in daylight |
| Smudges and fingerprints | Low or high-traffic panes | Check door handles |
| Water spots | Hard-water residue | Should be gone |
| Frames and sills | Wiped, not just glass | Tracks included |
| Screens | Clean and back in place | Often overlooked |
| Drips | On walls or floors | None should remain |
| Missed spots | Noted for return visit | Schedule a follow-up |
Step 3: Record Findings in a Window Cleaning Inspection Report
Writing down what you found turns a one-time check into useful evidence. To see the lasting value of professional window maintenance, compare your findings against the results it should deliver. A simple report lets you track quality, spot patterns, and show the service provider exactly what needs fixing.
Include these details in each report:
- The date and time of the inspection
- The areas reviewed, such as floor, elevation, or building side
- Any defects found, with photos where possible
- The status of each checklist item
- The date a return visit was requested, if needed
Commercial properties often benefit from detailed post-service reporting, which can help document maintenance for boards and insurers. For broader guidance, see the office window cleaning guide for facilities managers.
Frequently Asked Questions
How can you tell if windows were cleaned properly?
Look at the glass under natural light from a few angles, then check the frames, sills, and tracks. Streaks, water spots, residue, and missed corners are the common signs of incomplete work. Walk the full building rather than sampling one floor, and note any defects with photos and their location. Clarity Window Cleaning offers free estimates for all window cleaning needs, and you can request one through the contact page.
How often should commercial windows be cleaned?
Commercial window cleaning frequency depends on the building's exposure, traffic, and tenant expectations. Street-facing glass in a dense urban area often needs more frequent attention than glass shielded from weather and road dust. Many facilities managers set a schedule, then adjust it after reviewing inspection results for a few cycles. A site-specific plan helps keep glass consistent without disrupting tenants during business hours.
What should you do if you are unhappy with a window cleaning service?
Document the problem first with dated photos and the exact locations of defects. Share that record with your provider and ask for a re-clean of the affected areas. Clear documentation makes the conversation objective and speeds up resolution. If the issue continues, use your inspection report to compare results over time before deciding on next steps.